BJXGM - ADHESIVE-SCOTCH-WELD (R) 2216 A GRAY

  • MSDS: BJXGM
  • Manufacturer: 3M COMPANY
  • Product Name: ADHESIVE-SCOTCH-WELD (R) 2216 A GRAY
  • National Stock Number: 8040-00-145-0432
Product Identification

Product ID:ADHESIVE-SCOTCH-WELD (R) 2216 A GRAY
MSDS Date:02/08/1990
FSC:8040
NIIN:00-145-0432
Kit Part:Y
MSDS Number: BJXGM

Responsible Party
3M COMPANY
3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110,714-864-2310

Info Phone: 612-733-1110

Preparer: C.A. EISENHARD

Cage: 76381

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

AMIDE

Fraction By Weight: 61%


ALUMINUM SILICATE PIGMENT

CAS: 1302-76-7

RTECS: BD1450000

Fraction By Weight: 39%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5250000

Fraction By Weight: 1%

ACGIH TLV: 3.5 MG/M3

Hazards

Health Hazards Acute and Chronic:EXTREMELY IRRITATING TO EYES UPON
DIRECT CONTACT. MAY CAUSE PERMANENT EYE DAMAGE. MAY CAUSE SKIN
IRRITATION UPON PROLONGED CONTACT. MAY CAUSE SENSITIZATION IN SOME
INDIVIDUALS. VAPORS MAY BE IRRITATIN G TO RESPIRATORY SYSTEM. MAY
CAUSE GASTROINTESTINAL IRRITATION.
Effects of Overexposure:EYES:IRRITATING. SKIN:IRRITATING.MAY CAUSE
SENSITIZATION.

First Aid

First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR AT LEAST 10 MINUTES.
CONTACT A PHYSICIAN. SKIN:WASH THOROUGHLY WITH SOAP AND WATER.
INHALATION:PROVIDE FRESH AIR. SWALLOWED:DRINK TWO GLASSES OF WATER
OR MILK AND C ALL A PHYSICIAN.

Fire Fighting

Flash Point:+200F/+93C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.

Accidental Release

Spill Release Procedures:VENTILATE AREA. COLLECT SPILLED MATERIAL,
CLEANUP RESIDUE AND PLACE IN A METAL CONTAINER (U.S. DEPT OF
TRANSPORATION APPROVED IF IT IS TO BE SHIPPED).DISPOSE OF CLEANUP
MAT'L BY INCINERATION IN INDUST RIAL OR COMMERCIAL INCINERATOR.

Handling

Handling and Storage Precautions:PREVENT CONTACT WITH EYES AND
SKIN.AVOID INHALATION OR EYE CONTACT WITH DUST FROM GRINDING
OPERATIONS ON THE CURED MAT'L.USE ONLY IN WELL VENTED AREA.
Other Precautions:CURING OVENS MUST BE VENTED TO THE OUTDOORS. WASH
CONTAMINATED CLOTHING BEFORE REUSE. KEEP CONTAINER CLOSED. KEEP OUT
OF REACH OF CHILDREN.

Exposure Controls

Ventilation:LOCAL OR MECHANICAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

HCC:N1
Spec Gravity:1.26
Viscosity:52,000 CPS
Solubility in Water:NOT SOLUBLE
Appearance and Odor:GRAY PASTE, NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Disposal

Waste Disposal Methods:SINCE REGULATIONS VARY, CONSULT APPLICABLE
REGULATIONS OR AUTHORITIES BEFORE DISPOSAL. TWO PART
SYSTEM:COMBINED PARTS (B & A) WHEN FULLY CURED, MAY BE DISPOSED IN
A SANITARY LANDFILL PER REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.